Troubleshooting Tips for New Monitors.

Here are some basic trouble shooting tips for new monitors:

 1. The picture does not appear
          * Check to make sure the signal cable is firmly connected in the socket.
          * Check to see if the computer system's power is ON.
          * Check that the Brightness Control is at the appropriate position, not at the minimum. 
2. The Screen is not synchronized


          * Check to make sure the signal cable is firmly connected in the socket.
          * Check that the output level matches the input level of your computer.
          * Make sure the signal timing of the computer system is within the specification of the monitor. 
3. The position of the screen is not in the center
          * Adjust the H-Size, H-Phase or V-Size, V-Center controls.
          * Check if the signal timing of the computer system is within the specification of the monitor.
4. The screen is too bright or too dark
          * Check if the Brightness or contrast control is at the appropriate position, not at the maximum or minimum.
          * Check if the specified voltage is applied
          * Check if the signal timing of the computer system is within the specification of the monitor.
          * Especially, check the horizontal frequency.
5. The screen is shaking
          * Move all objects that emit a magnetic field, such as a motor or transformer, away from the monitor.
          * Check if the specified voltage is applied.
          * Check if the signal timing of the computer system is within the specification of the monitor.

If You Like This. Please! Drop a Comment And Share This...